Rail Clamp for P43 Rail

Rail clamps for P43 rail (43kg/m rail) are heavy-duty fasteners primarily used to secure crane beams and industrial tracks. The most common standard is the TG43 (part of the WJK series), which is a welded rail fixture designed for stable alignment in high-load industrial applications. 

Primary Product Options

• TG43 WJK Rail Clamp: A high-strength welded construction specifically for 43kg/m rails. It consists of a base plate, cover plate, T-bolt, nut, and washer.

• Material: Typically cast steel or hot-forged Q235/Q345 steel.

• Features: Includes a vulcanized rubber tongue to provide buffering and seismic resistance.

• GDGL-2 Rail Clamp: A welded heavy-duty clip specifically sized for P43 rail, known for high resistance against lateral forces.

• Combined Clamp Plate (38-43kg): Used for emergency or temporary connections of cracked rail ends. 

Key Specifications

Feature           Standard (TG43/WJK)

Material           Cast Steel or Forged Q235/Q345

Lateral Load   Up to 38KN (for Grade 8.8 bolts)

Adjustment Typically allows ~13mm horizontal adjustable distance

Torque         150Nm for medium duty; 220Nm for heavy duty (>275t)

Weight         Approximately 1.4kg per assembly

Installation Overview

• Base Welding: The base plate is welded to the steel beam or support plate using low-hydrogen electrodes (E4315 or E5015).

• Assembly: The T-bolt is inserted into the base slot, followed by the wedge adjusting plate.

• Securing: The press plate, washers, and nut are installed and tightened to the specified torque after adjusting for full contact with the rail flange.

Signum Rail Fastening is able to offer rail clamps(rail clips) according to the client’s requirements.

Contact us now to get a quote.