Embedded Files
The 115RE Rail anchors made in one-piece construction from spring steel are designed to fasten the steel rail tight on the base of the rail to prevent the rail from longitudinal movements.
115RE rail anchor has the functin of “ creeping” of the rail, caused by changing temperature, grades, traffic patterns, and braking action of trains.
Notices about 115RE Rail Anchors
Notices about 115RE Rail Anchors
Rail anchors should be on the gage side of the rail base against the same tie face on opposite rails. Rail anchors have to hold the rail base tightly and firmly and have full bearing against rail tie face. A new rail anchor and a rail tie will be needed when the bearing of rail anchor against the tie has been disturbed. Anchors shall not be moved by driving them along the rail. The rail ties should be kept straightened when the anchors are applied.
(1) Russian rail anchor is often used in railways by casting, which is made from material of QT400-15. All related mechanical properties of it are strictly following with the standard of TOCT 7293-85.
(2) Rail anchors can be costomized raccording to your drawings in our factory.
Report abuse